Echo PPT-2400 Bedienungsanleitung PDF herunterladen (Seite 18)

SMTWTF S

1234567

8 9 10 111213 14

1516 17 181920 21

2223 24 252627 28

2930 31

IMPORTANT

Stored fuel ages. Do not mix more fuel than you expect to use in

thirty (30) days, ninety (90) days when a fuel stabilizer is added.

IMPORTANT

Stored two-stroke fuel may separate. ALWAYS shake fuel con-

tainer thoroughly before each use.

AUTOMATIC OILING SYSTEM

1. Turn oil fill cap 45

counter clockwise and lift to remove.

2. Fill with a quality, low viscosity, guide bar and saw chain oil.

IMPORTANT

To prevent plastic deterioration, do not use synthetics or silicones

based oil.

3. Set rate indicator (A) to center by turning adjustment wheel (B).

4. Adjust for minimum oil rate by turning adjustment wheel (B). (Very

little visible oil on the saw chain will provide sufficient lubrication).

NOTE

Proper oiling rate will use one reservoir of oil for each tank of gas.

IMPORTANT

Do not force adjustment wheel after indicator has reached the end

of travel window.

EQUIPMENT CHECK

Before operation a complete check of the unit must be performed;

• Check unit for loose/missing nuts, bolts and screws. Tighten and/or

replace as needed.

• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO

NOT operate unit if leaks are found.

• Check that the cutting attachment is firmly attached and the saw chain

is correctly tensioned on the guide bar. Dull, loose or damaged saw

chain should not be used. Refer to page 29 for correct Filing Saw

Chain procedures.

• Check that shoulder harness is adjusted for safe, comfortable opera-

tion. See figure at right for proper adjustment.

15 M

(50 ft.)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Keine Kommentare

Echo PPT-2400 Bedienungsanleitung Seite 18