Echo 74554 Instruction v.2 Bedienungsanleitung PDF herunterladen

Instruction Sheet

Instructions

PN 73072-00

Rev.083010

SUBJECT: ELECTRONIC FEED

KIT (PN 73071)

FITS MODELS: CH5540H (74554)

Before inspecting or servicing any part of this machine,

shut off power source, remove key, disconnect the

battery cables and make sure all moving parts have

come to a complete stop.

WARNING

The electronic feed control kit is used to monitor the speed

of the feed roller to facilitate more efficient chipping.

INSTALLATION

Inspect kit to verify all items were received.1.

Remove the two washers and nuts from the proximity 2.

sensor of the harness.

Attach proximity sensor to the supplied proximity 3.

sensor bracket (73099-12) by feeding it through the top

hole in the bracket. Replace (on sensor) one nut and

washer removed in step 2. Insert the threaded portion

of proximity sensor through the bottom hole and add the

remaining washer and nut and secure.

Attach bracket to the end of existing bolt on bearing 4.

mount plate with 1/2” washer and nut. See Figure 2 for

mounting location.

Position the proximity sensor within .30" of the rotor 5.

shaft. When proper gap is achieved, tighten bracket in

place. Secure the harness to the top of the proximity

sensor bracket with provided nylon cable tie.

Remove roller cover by loosening and removing the five 6.

3/8” bolts and washers.

Attach LOFA Hydraulic Control (12674) to the holes 7.

drilled in the side of the roller support with iso-mounts

supplied on the control. Secure with four 8/32” locknuts.

See Figure 4 for mounting location detail.

Replace roller cover removed in step 6.8.

Remove the control box plate from the top of the switch 9.

mount box. See Figure 1.

Attach the auto feed control relay to the switch mount 10.

weldment with two 8/32” x 3/4” screws and 8/32”

locknuts. Position the auto feed control relay with the

connectors facing downward. Refer to Figure 1.

Remove the knockout from control box plate.11.

Place the auto feed on/off switch (12682) in the space 12.

vacated by the knockout.

SWITCH BOX DETAIL

DECAL

(12737)

ON/OFF SWITCH (12682)

AUTO FEED

RELAY (12675)

FORWARD &

REVERSE

SWITCH

DISK SENSOR PLACEMENT

GAP

1/32" - 1/16"

Figure 1

Figure 2

CONTROL BOX PLATE

BEARING MOUNT PLATE

SWITCH MOUNT

WELDMENT

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Instructions

Instruction SheetInstructionsPN 73072-00Rev.083010SUBJECT: ELECTRONIC FEED KIT (PN 73071)FITS MODELS: CH5540H (74554)Before inspecting or servicing

Seite 2 - HYD. FEED PTO

Instruction SheetSENSOR ASSEMBLYBLACK (-)RED (+)BLACKORG/BLK(REV.)GRN/BLK(FOR.)BLACK(-)BLACK(-)BLACKGREENWHITEBLACKFORWARDSWITCHREVERSESWITCHGRN/BLKOR

Seite 3 - HARNESS HOOKUP

Instruction Sheet FEED SENSOR PROGRAMMING INSTRUCTIONStep 1. Initiating Program ModeHold down the "S" button while turning the

Seite 4 - TO GROUND

Instruction SheetPARTS LIST, KIT# 73071ELECTRONIC FEED PARTS LIST (PN 73071)PART NUMBER DESCRIPTION QTY.12674 CONTROL, LOFA (SPEED) 112675 RELAY, CONT

Verwandte Modelle: CH5540H Instruction v.2

Kommentare zu diesen Handbüchern

Keine Kommentare

Echo 74554 Instruction v.2 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Gartengeräte Echo 74554 Instruction v.2 herunter. Echo 74554 Instruction v.2 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: CH5540H Instruction v.2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gartengeräte Echo 74554 Instruction v.2