Echo LS21 Instruction v.3 Bedienungsanleitung PDF herunterladen

Instructions

PN 36323-00

Rev. 010112

SUBJECT: QUICK SPLIT (PN

75896-00) AND THROTTLE DOWN

(PN 75899-00) KITS

FITS MODELS: ALL LOG

SPLITTERS*

Before inspecting or servicing any part of this machine,

shut off power source, remove key, disconnect the

battery cables and make sure all moving parts have

come to a complete stop.

WARNING

1. Install the channel and angle mount assembly on the

right side of the log splitter in the channel with two

3/8 x 3/4" self-tapping hex bolts. IMPORTANT: If your

log splitter does not have the hex bolt holes already

pre-drilled, see Appendix 1 on page 8 for drilling

instructions.

2. Do not completely tighten bolts at this point. Allow

enough movement to assist in completion of

assembly

3. Pull knob on angle mount assembly out to install slider

plate into channel mount as shown in Figures 3 and

INSTALLATION

NOTE

If the throttle down kit is installed on model LS21160,

you will first need to install a new Control Assembly.

Contact your local Honda dealer to order part #

16500-ZL8-800.

Figure 1. Channel and angle mount assembly

Figure 2. Channel and angle mount assembly

Figure 3. Pull knob out to install slider plate

Figure 4. Slider plate installed

NOTE

Throttle Down Kit #75899-00 is not designed for use

on LS21 and LS21E Log Splitter models

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Instructions

InstructionsPN 36323-00Rev. 010112SUBJECT: QUICK SPLIT (PN 75896-00) AND THROTTLE DOWN (PN 75899-00) KITSFITS MODELS: ALL LOG SPLITTERS* Before i

Seite 2 - SLIDE ANGLE

Instruction Sheet26. Install spring on angle assembly. See Figure 7.7. Remove the existing valve handle by removing the two pins and cottter pins th

Seite 3 - CABLE CLAMP

Instruction Sheet3Figure 11. Reinstall lever knobFigures 12 & 12a. Connecting slide angle and new handleFigure 13. Throttle cable installed in cab

Seite 4 - Instruction Sheet

Instruction Sheet420. Remove the wire stop from the throttle cable by loosening the bolt.21. Attach the cable stop with a screw supplied with the th

Seite 5 - OPERATION

Instruction Sheet522. Hook the spring between the lever bottom sheet and the mount angle. On the quick split kit adjustment may be necessary in orde

Seite 6 - QUICk SPLIT kIT PARTS DIAGRAM

Instruction Sheet6QUICk SPLIT kIT (PN 75896-00)Item Part # Description Qty.1 12177SPRING, HEAVY DUTY COMPRESSION12 14048-00 CLAMP, 9/16" COATED 1

Seite 7 - Item Part # Description Qty

Instruction Sheet7THROTTLE DOWN kIT PARTS DIAGRAMTHROTTLE DOWN kIT (PN 75899-00)Item Part # Description Qty.1 14048-00 CLAMP, 9/16" COATED 12 150

Seite 8 - APPENDIX 1

ECHO BEAR CATwww.bearcatproducts.com237 NW 12th Street, West Fargo, ND 58078-0849Phone: 701.282.5520 • Toll Free: 800.247.7335 • Fax: 701.282.9522E-ma

Verwandte Modelle: LS27 Instruction v.3

Kommentare zu diesen Handbüchern

Keine Kommentare

Echo LS21 Instruction v.3 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Gartengeräte Echo LS21 Instruction v.3 herunter. Echo LS21 Instruction v.3 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: LS27 Instruction v.3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gartengeräte Echo LS21 Instruction v.3