Echo DL10570 Instruction v.2 Bedienungsanleitung PDF herunterladen

Instruction Sheet

The debris loader tailgate adapter kit allows DL10570 and

DL8390 models to easily slide onto a vehicle tailgate.

INSTALLATION

Set the tailgate adapter on the hitch tube of the debris 1.

loader as shown in Figure 1. The adapter should rest

on the engine support channel.

Attach the tailgate adapter assembly to the debris 2.

loader hitch tube with two 3/8" U-bolts, four flat washers

and four nylock nuts. Torque hardware to 30 ft-lbs.

Instructions

PN 75760-00

Rev. 090909

SUBJECT: TAILGATE ADAPTER KIT

KIT # 75753-00

FITS MODELS: DL10570 & DL8390

Before inspecting or servicing any part of this machine,

shut off power source, disconnect spark plugs and make

sure all moving parts have come to a complete stop.

WARNING

Figure 1, Adapter installation

Adjust the hitch tube so it sits flush with the tailgate 3.

adapter (see Figure 2). If the hitch tube is not adjusted

properly, it may scratch the tailgate. Use one of the two

options below to make the adjustment:

Mark and cut the hitch tube so it sits flush with the a.

tailgate adapter.

Remove the middle 5/16" bolt from the fan housing b.

hitch channel (Figure 2). Loosen the remaining

two 5/16" bolts in the hitch channel. Then, loosen

the four 3/8" U-bolts on the engine support and

tailgate adapter. Slide the hitch tube back until

the front end of the tube is flush with the tailgate

adapter. Tighten the 3/8" nuts on the U-bolts to 30

ft-lbs. and reinstall the three 5/16" bolts in the fan

housing hitch channel. Drill the top hole through

the hitch tube.

ATTACHING THE DEBRIS LOADER

Make sure the tailgate of the vehicle is in the upright 1.

position and latched securely.

Hoist the debris loader. Position the lip of the tailgate 2.

adapter (Figure 2) above the vehicle tailgate.

Slowly lower the tailgate adapter lip onto the tailgate.3.

Make sure the support plate rests on the vehicle 4.

bumper. If it doesn't, loosen the 3/8" carriage bolts and

move the support plate within the slots. If necessary,

you can also remove and reinstall the support plate

in a different set of slots. Torque 3/8" hardware to 30

ft-lbs. when finished.

Use the two 3/8" bolts and adjustment nuts to tighten 5.

the adjustment bar against the vehicle tailgate.

Ensure the vehicle tailgate is properly latched before

attaching the debris loader with the tailgate adapter

installed.

CAUTION

ENGINE SUPPORT

CHANNEL

HITCH

TUBE

3/8”

U-BOLTS

5/16” x 2-3/4”

BOLTS

HITCH TUBE

SHOULD BE

FLUSH WITH

ADAPTER

WELDMENT LIP

ADJUSTMENT

BAR

SUPPORT

PLATE

Figure 2, Hitch tube adjustment

1 2

Inhaltsverzeichnis

Seite 1 - Instructions

Instruction SheetThe debris loader tailgate adapter kit allows DL10570 and DL8390 models to easily slide onto a vehicle tailgate.INSTALLATIONSet the t

Seite 2 - PARTS LIST, KIT NO. 75753-00

PARTS LIST, KIT NO. 75753-00ITEM PART NUMBER DESCRIPTION QTY 1 13904-00 BUMPER, RUBBER 62 15031 WASHER, 3/8 FLAT 83 15051 NUT, 3/8 SERR FLA

Verwandte Modelle: DL8390 Instruction v.2

Kommentare zu diesen Handbüchern

Keine Kommentare

Echo DL10570 Instruction v.2 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Gartengeräte Echo DL10570 Instruction v.2 herunter. Echo DL10570 Instruction v.2 User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: DL8390 Instruction v.2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gartengeräte Echo DL10570 Instruction v.2